100M HDMI Extender(Set)

Previous 4 / 7 Next

100M HDMI Extender(Set) CCTV Accessories


100M HDMI Extender (Set)

Model : STR100-HDV


Features:
  • DC5V~12V wide power supply.
  • HDMI 1.3, HDCP 1.1 and DVI1.1 compliant.
  • Support Deep Color up to 12 bits/color
  • Support IR re-transmitting.
  • Uses one CAT5E/6 cable for data/DDC transmission.
  • Equalizes and recovers incoming TMDS data before re-transmitting it in optimal quality regardless of the incoming signal quality.
  • Cable testing showed that with 1080p resolution the HDMI input source can be 20meters away.
  • When transmitting a signal in 1080p resolution the CAT6 operating distance is 100 meters.

Operation controls and Functions:
HDMI Extender Transmitter  
                   Front Panel                                           Rear Panel

¢ÙPower£ºPlug the 5V~12VDC power supply into the unit and connect the adaptor to AC wall outlet.

¢ÚRESET: Factory reset button. When the Receiver system functions have been changed, Pressing this button for 10seconds can realize factory reset.

¢ÛIR OUT£ºRemote control signal transmit£¬connect the IR transmit cable with HDMI Extender Transmitter£®The IR transmit cable face to the IR receiver of  the Source£®

¢ÜHDMI£ºHDMI Input port.

¢ÝCAT6 OUT: Connect the CAT 5E/6 output of the Transmitter with the CAT 5E/6 input of the HDMI over single CAT6 receiver.

¢ÞLED indicator: When the DC power on, the indicator will be light.

HDMI Extender Receiver 
                    Front Panel                                                    Rear Panel

  • STR100-HDV

  • STR100-HDV

  • STR100-HDV

¢ÙPower: Plug the 5V~12VDC power supply into the unit and connect the adaptor to AC wall outlet.

¢ÚRESET: Factory reset button. When the Receiver system functions have been changed, Pressing this Button for 10seconds can realize factory reset.

¢ÛIR IN: Remote control signal Receive£¬connect the IR receive cable with HDMI Extender Receiver£®

¢ÜHDMI Out: HDMI output port.

¢ÝCAT6 IN: Connect the CAT6 in of the receiver with the CAT6 input of the HDMI over single CAT6 transmitter.

¢ÞLED indicator: When the DC power on, the indicator will be light.
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  

Switch to Mobile Version
Subscribe Newsletter
1
Hello! Thanks for visiting my site. Please press Start button to Contact with Admin :)

Start